PROFILINE Ceramic Coating CC Plastic+Rubber

SONAX PROFILINE Ceramic Coating CC Plastic + Rubber is a new type of sealant based on Si-Carbon technology for refreshing and protecting unpainted exterior plastic and rubber surfaces (seals, rubber parts). The coating is very easy to apply and use. It protects against fading caused by UV radiation and repels water and dirt. The pack contains the coating and 4 applicators.

Mask off the area around the work surface with masking tape so that the product is not applied to surfaces it is not intended for, e.g. paint or glass. If this happens, wipe it off immediately. Put a few drops on the soft foam side of the applicator and spread a thin coat over small sections. After a short time (3–5 minutes), wipe off any product residue with a SONAX Microfibre Cloth Soft Touch (451000). The coating needs at least 6 hours to cure; during this time the car must stay in a controlled environment and the surfaces must not be touched. For best results, we recommend leaving the coating to dry for at least 12 hours so that it bonds fully with the surface. For aftercare, wash with a pH-neutral shampoo such as SONAX Gloss Shampoo Concentrate (314300) or SONAX PROFILINE ActiFoam Energy (618300). Avoid alkaline cleaners.