PROFILINE CeramicCoating CC One

CC One is long-term protection for car paintwork, based on the new Si-Carbon technology. It is easy to apply in a single step and gives protection that lasts up to three years. It gives the paint more colour intensity and depth, and leaves a smooth, wax-like surface that repels dirt. The coating is very user-friendly and saves time, which makes it a good choice for beginners who do not yet have much experience with ceramic coatings. The pack includes two applicators and instructions for use.

Ensure good ventilation during application. The application temperature must be +10°C or above. The ideal temperature is between 20 and 30°C. Take care if a panel has been refinished: check material and paint compatibility first. Wash the vehicle thoroughly. Clean the car's surfaces well and, if necessary, polish them to remove defects and achieve a flawless finish free of scratches, marks and holograms. Before applying the ceramic coating, use Prepare (237300) with a Soft Touch microfibre towel (451000) and gently wipe all surfaces so that they are completely clean and free of residue and dirt. Put a few drops of CC One on the white side of the applicator and spread a thin, even coat in a crosshatch pattern. The application area should be about half a square metre (i.e. a quarter of the bonnet). After a short wait of about 1 to 3 minutes, wipe off the residue with a microfibre cloth for ceramic coatings (451341-1) without leaving streaks. Follow the same procedure over the whole vehicle, then leave the coating to set and cure for at least 4 hours. If the applicator starts to harden during application, replace it with a new one. The vehicle must stay in a clean, dry place throughout this time, and the surfaces must not be touched. The contents of the pack are enough for one complete application. Do not apply the product to hot surfaces and do not let it dry on. Do not wash the car for the first 7 days after application. Important: Do not use highly alkaline cleaners, as they can damage the protective coating.