PROFILINE EX 04-06 – Fine Polish for Dual-Action Polishers 250 ml

Fine polish for a high-gloss finish with dual-action polishers. Suitable for one-step polishing of vehicles in good condition, and as a final step after polishing with ExCut 05-05 compound (245300). Produces very little dust. Silicone-free. Cut level: 4 Gloss level: 6

Shake the bottle before use. Because of the formula of its abrasive grains, the polish is suitable only for use with dual-action polishers. It is recommended for use with a medium pad (498600); you can choose a wool pad if needed. Put polish on the pad of your choice and spread it at low speed for 20 seconds with moderate pressure. Then increase the speed and continue polishing with light pressure for about 120 seconds. Times and speeds may vary with the type of polisher used; the times given refer to one polishing cycle on an area of about 1 square metre of medium-hard paint. Wipe off the polish residue with a microfibre cloth (451000). Always check the result by cleaning the surface with a microfibre cloth and PROFILINE Prepare paint cleaning spray (237300), then inspect it with a lamp. Clean the pad regularly with compressed air during use. Do not use different polishes on the same pad, and do not use on hot surfaces. Protect the product from frost. Keep out of the reach of children.