PROFILINE NP 03-06 – Fine Polish 1 L

Silicone-free fine polish for a high-gloss, hologram-free finish on lightly scratched or pre-polished paintwork, using a rotary polisher. Cut level: 3 Gloss level: 6

Shake the bottle well before use. Apply the product to the medium polishing pad (498541) or the soft finishing pad (493241). The choice depends on the condition of the surface, the hardness of the paint and the result you want. Put some polish on the pad of your choice, spread it at low speed (800 rpm) with moderate pressure of 5–10 kg for 30 seconds, then polish at a higher speed (1500 rpm) with light pressure of 1–2 kg for 90 seconds. Times and speeds may vary with the type of polisher used; the times given refer to one polishing cycle on an area of about one square metre of medium-hard paint. Always check the result by cleaning the surface with a microfibre cloth and PROFILINE Prepare paint cleaning spray (237300), then inspect it with a lamp. A second polishing (finishing) step with the NP 03-06 fine polish (208300) is recommended for a flawless result. Clean the pad regularly with compressed air during use. Do not use different polishes on the same pad. Do not use on hot surfaces. Protect from frost. Keep out of the reach of children.