PROFILINE Perfect Finish 4/6 – Fine Polish 250 ml

Fine polish for one-step polishing, for finishing pre-polished surfaces and for spot repairs after painting. It contains special, very fine yet hard abrasive grains that remove marks down to P2000 sanding marks and leave a high-quality finish. Produces very little dust and wipes off easily. Silicone-free. Cut level: 4 Gloss level: 6

Shake the bottle well before use. The polish can be used with either a rotary or a dual-action polisher, depending on the result you want. With a rotary polisher it is suitable for one-step polishing or for spot repairs of defects sanded with P2000 paper or finer, even on freshly painted surfaces. With a dual-action polisher it is used for one-step polishing or for finishing after polishing with coarser compounds (Ultimate Cut, CutMax, Cut+Finish). The polish is recommended for use with the pads 498541, 498600 and 493241; the choice depends on the hardness of the paint and the result you want to achieve. You can also choose a harder pad if needed. Put some polish on the pad of your choice, spread it at low speed with moderate pressure, then polish at a higher speed with light pressure. Always keep the pad flat on the surface. Always polish with enough polish, never "dry". On freshly painted surfaces, several short polishing passes, adding a few drops of polish each time, are recommended instead of one long polishing cycle. Wipe off the polish residue with a microfibre cloth (451000). Always check the result by cleaning the surface with a microfibre cloth and PROFILINE Prepare paint cleaning spray (237300), then inspect it with a lamp. Clean the pad regularly with compressed air during use. Do not use different polishes on the same pad. Do not use on hot surfaces. KEEP OUT OF THE REACH OF CHILDREN