PROFILINE Ultimate Cut 6+/3 – Extra Heavy Cut Compound 1 L

SONAX PROFILINE Ultimate Cut 6+/3 Extra Heavy Cut Compound 1 L is a professional high-cut compound for fast correction of heavily worn paintwork. With aluminium oxide abrasive grains, it removes P1000 sanding marks, performs well on hard clear coats and is well suited to freshly painted or large surfaces. Silicone-free, with cut level 6+ and gloss level 3.

Shake the bottle well before use. The compound can be used with either a rotary or a dual-action polisher, depending on the condition of the surface, the hardness of the paint and the result you want. With a rotary polisher it is used as a first step to correct defects, including P1000 or finer sanding marks, even on fresh paint. The compound is recommended for use with a wool pad (493141) or a hard pad (492241). The choice depends on the condition of the surface, the hardness of the paint and the result you want. With a dual-action polisher, use it with the hybrid wool pad (493800) or the hard pad (492341), depending on the condition. Put some compound on the pad of your choice, spread it at low speed with moderate pressure, then polish at a higher speed with light pressure. The pad may be slightly tilted at first, but must then be kept flat on the surface. On freshly painted surfaces, several short polishing passes, adding a few drops of compound each time, are recommended instead of one long polishing cycle. Wipe off the compound residue with a microfibre cloth (451000). Always check the result by cleaning the surface with a microfibre cloth and PROFILINE Prepare paint cleaning spray (237300), then inspect it with a lamp. Further polishing steps with finer compounds are recommended for a flawless result. Clean the pad regularly with compressed air during use. Do not use different polishes on the same pad. Do not use on hot surfaces. KEEP OUT OF THE REACH OF CHILDREN