PROFILINE Ceramic Coating Vinyl+PPF

Special ceramic coating for vinyl wraps and paint protection film (PPF) with a glossy or matt finish. The elastic structure of the coating bonds firmly with the film and gives strong water and dirt repellency. It improves the colour depth of the film, leaves a smooth feel on the surface and lasts up to 18 months. It does not affect the matt finish of matt films. The box contains the ceramic coating (50 ml), 4 applicators and detailed instructions for use.

Put a few drops on the white side of the applicator supplied in the box. Work section by section on areas no larger than 50 x 50 cm. Spread an even, thin coat with crosshatch strokes and wipe off immediately with a microfibre towel for ceramic coatings (451100). As films are porous, make sure the steps above are followed carefully to avoid defects in the finish. If the applicator hardens, use a new one (usually 2 are needed for a medium-sized car). For at least 6 hours after application, do not wet or touch the surfaces. It is also recommended to keep the vehicle in a controlled environment for 12 hours and not to wash it for at least 1 week, so that the material can dry and cure properly.